No, not the Obama/McCain smackdown on Nov 4. As you may have read in SD Times, SpringSource has been elected to the JCP Executive Committee for Java SE/EE, along with SAP, Ericsson, Nokia, Philips, and IBM. I will be the SpringSource representative.

Not that the JCP matches the scale of the presidential race. But this is an important moment for SpringSource, and one that reflects the years of hard work and leadership the entire team at SpringSource has provided in enterprise Java. More importantly, I believe that our election will help us to make Java stronger.

From the first book through the…

Updated 28-Oct-2008: Added up-to-date sample links and link to third sample

Last night I presented 'Introduction to SpringSource dm Server' at the Philadelphia Spring User's Group. During this presentation I created a small application called GreenPages, demonstrating all the major aspects of dm Server. I promised the attendees that I would post the application and the slides here.

In the last few weeks since the GA release of dm Server many people have been asking about the best way to get started with dm Server, so I'm using this entry to collect all the relevant information together…

In this article we outline the main themes of Spring Batch 2.0, and highlight the changes from 1.x. Development work on the new release is well underway, with an M2 release last week, and we are getting a lot of interest, so now seems like a good time to give a few pointers.

Spring Batch 2.0 Themes

The four main themes of the new release are

• Java 5 and Spring 3.0
• Non-sequential execution
• Scalability
• Configuration: annotations and XML namespace

so we'll cover each of those areas separately and describe what they mean and the impact of the changes on Spring Batch existing users. There is more detail below for features that are already implemented, which is mostly in the first category with some enabling features in other areas.

There are no changes to the physical layout of the project in Spring Batch 2.0.0.M2 (same old downloads, same basic layout of Java packages). We have not removed any features, but we have taken the opportunity to revise a couple of APIs, and there are some minor changes for…

If you build an application for the SpringSource dm Server, or any other OSGi platform, you'll probably encounter the uses directive before long. Unless you have a clear understanding of the purpose of the directive, you won't know when to code it and you'll be left guessing when a bundle fails to resolve because of a uses conflict. This article should give you a thorough understanding of the uses directive, when to use it, and how to debug uses conflicts.

Bundle Resolution

OSGi is designed so that once bundles are 'resolved', you shouldn't typically hit class cast exceptions and similar problems due to type…

We are pleased to announce that Spring .NET 1.2.0 RC1 has been released.
Download | Support | Documentation | Changelog
This release contains the following features:

• WCF Integration - Configure WCF services using dependency injection. Apply AOP advice to WCF services.
• MSMQ integration - MSMQ helper classes to increase your productivity developing messaging applications. Provides integration with Spring's transaction management features.
• Apache ActiveMQ integration - Helper classes to increase your productivity developing messaging applications with ActiveMQ
• Quartz integration - Configure Quartz jobs, schedulers, triggers using dependency injection. Convenience classes for implementing Quartz Jobs and integration with Spring's transaction management features.
• AOP New inheritance based AOP proxy generation.
• Performance Improvements in WebForm dependency injection.
• NHibernate 2.0.1 support.

Other notable new features in 1.2.0 RC1

• Color code and XML listings in reference documentation.
• Introduction of sterotype attributes - for example [Repository] 
• WCF Service exporter.
• Extensible web navigation.
• New QuickStart applications are available for WCF, Quartz, MQMQ, and Apache Active MQ integration.

Support for TIBCO EMS, Websphere MQ, and Progress SonicMQ will be made available commerically.  Contact sales for more information.

Please refer to the changelog for additional details.

Enjoy!

Spring Batch 2.0.0.M2 is now available. See the Spring Batch downloads page for more information - there is the usual .zip download and also Maven artifacts in S3.

Most work in this release went into the chunk-oriented approach to processing, which means changes to the ItemReader and ItemWriter interfaces, plus the introduction of the ItemProcessor as a top-level concern for translating between input and output items. Chunk-oriented processing is a key enabler for performance and scalability, as well as being much clearer for users in the extension points and interfaces (no more framework…

A few weeks ago Filip Hanik and I gave the second in a series of webinars on Optimising and Tuning Apache Tomcat. A recording of the webinar and a copy of the slides can be obtained from the webinars section of the SpringSource website. The same page has links for all the previous SpringSource webinars, as well as the Covalent webinar archive.

We weren't able to get to all of the questions during the Q&A session so, as promised, here are the remaining questions and our answers.

• How do you identify memory leaks in a Tomcat application?

  You will almost certainly need to use a profiler to identify the root cause of a memory leak. The latest Sun JDKs include tools like jhat and jmap. There are also many other profilers available, both free and commercial. Filip and I use YourKit when investigating Tomcat memory leaks as YourKit provide free licences to open source developers.

• How can redeployment cause a memory leak?

  This usually occurs when a class loaded by Tomcat retains a reference to a class loaded by the web application. When the web application is stopped, the Tomcat class loader continues to retain the reference to the class loaded by the web application. This class retains a reference to the web application's class loader which in turn, retains references to all the classes it loaded. Therefore, the web application class loader and all the classes it loaded are not eligible for garbage collection. This causes a memory leak. The typical root causes of this are JDBC drivers and logging frameworks.

• What is the best way to change the JVM Tomcat uses?

  The JVM to use is set using the JAVA_HOME (full JDK) or JRE_HOME (JRE only) environment variable. The correct place to set this will depend on your environment, particularly if Tomcat is configured to start automatically at system start. If you have a free choice on where to set this then use setenv.bat or setenv.sh as appropriate for your operating system.

• Do you recommend a particular JVM?

  No, we do not. The JVM vendor you choose depends on your OS.

• Which connector should I use to connect Apache httpd to Tomcat?

  We recommend mod_proxy_http with mod_jk a close second. Generally, mod_proxy_ajp is less stable than either mod_proxy_http or mod_jk. Note that mod_jk2 has been deprecated and should no longer be used.

• What is the correct setting for maxKeepAliveRequests when using SSL?

  When using SSL HTTP keep alive should be enabled as the SSL handshake is a relatively expensive operation to perform for every request.

• If we run Tomcat on Solaris, do you recommend against using the native APR connector?

  Yes, we do. The feedback we have received from clients is that the APR connector is not stable on Solaris.

• We previously tried moving to mod_proxy_http on Solaris but we encountered several bugs. Have these bugs been resolved?

  Without knowing the exact bugs or version you were using, it is difficult to comment. All known Apache httpd issues and the current status can be found in the ASF Bugzilla Database. Tomcat issues can also be found in Bugzilla.

• What value should I use for maxKeepAliveRequests with the default blocking IO HTTP connector?

  For high concurrency environments, set it to 1. Otherwise, set it to the average number of objects you have on a page, anywhere between 10 and 100.

• How do I configure JkOptions +DisableReuse?

  JkOptions +DisableReuse should be placed in your httpd.conf file with your other mod_jk settings.

• When is it best to use the bon-blocking IO HTTP connector?

  When you need to support high concurrency with keep alive and APR is not an option, e.g. because it is unstable on your platform.

• Will I see better performance if I use Apache httpd in front of Apache Tomcat?

  It depends. If you proxy all of the requests to Tomcat then performance will decrease slightly. If httpd handles some requests (eg all the static content) then you will probably see some benefit. There are a number of benchmarks that attempt to demonstrate that one connector is better than another. However, it is very unlikely that any of these benchmarks will be representative of your application. The only way to know for sure is to test it in your environment with realistic load and usage patterns.

• Can Tomcat be used in production without a web server in front of it?

  Yes. Whether this offers the best performance for your environment will depend on that environment and your application. As with the previous question, the only way to know for sure is to test it in your environment with realistic load and usage patterns.

• Will using Apache httpd in front of Tomcat increase security?

  The security of your installation will depend on many factors. The use, or not, of Apache httpd is unlikely to significantly change the security of your installation. Other factors such as keep up to date with patches and using a firewall usually have a much greater impact on your overall level of security.

• Which Apache httpd MPM provides the best performance?

  As always, it will depend on your environment but the httpd performance tuning documentation offers some useful general guidance.

• What is the performance difference between SpringSource ERS and Apache Tomcat?

  SpringSource ERS is much more than just Apache Tomcat. From a pure Tomcat perspective, performance isn't the differentiating factor. The benefits of ERS are the simple installation, the easy to manage upgrades and patching, support for multiple instances and the integration of all of the components.

• My company uses Tomcat and XYZ application server. How does Tomcat compare to XYZ application server and are there benefits in consolidating?

  There will be lots of differences and the differences that matter will vary from organisation to organisation. Start by working out what you want from an application server and then compare that list to the market. There are benefits in consolidating. Greater consistency means simpler maintenance, less training and so on. However, there are also costs. You would need to look at your organisation and how it planned to consolidate (new projects only, all projects for next major release, everything now, etc) to compare the costs with the associated benefit.

• Do you have performance comparisons available for Tomcat and XYZ application server?

  Various reports have been published in this area. How useful the results are depends on how well matches the test is to your load. As always, the only way to know for sure is to test in your environment with realistic load and usage patterns.

• What is a good method for load testing a Tomcat server?

  There are several options available with tools that drive load, both free and commercial. The free tools include ab and JMeter.

• For high availability and performance, can Tomcat be configured to launch multiple JVMs for the same web application?

  Tomcat does not provide this as a configuration option. You can, of course, create multiple Tomcat instances, install your application on each instance and then load-balance across the instances.

• Is there a generic health-check script for Tomcat?

  The Manager status page is probably a good place to start. You can use the code for that Servlet as the basis for your own, more specific/extensive checks if required. If you do enhance it, consider contributing your enhancements back to the Apache Tomcat community.

• Where is the logging.properties file located?

  The default location is in $CATALINA_BASE/conf.

Running a business is like writing code in at least one respect: You don't always get it right the first time, even if you know what you want to achieve—but you do get a better result in the end if you are prepared to rework things when necessary. At SpringSource, we had a clear vision for our recently announced maintenance policy: balancing the needs of the open source community with those of enterprise users and the creators of Spring, for the benefit of all. However, we didn't get the balance quite right first time, and it's time for some refactoring.

Over the last couple of weeks, I've…

The CommonServiceLocator project was released this week on CodePlex with the general idea of providing an IoC container agnostic API for resolving dependencies using Service Location. Erich Eichinger from SpringSource contributed the Spring.NET implementation, thanks Erich!

Here is the API so you get the basic idea public interface IServiceLocator : System.IServiceProvider {

object GetInstance(Type serviceType); object GetInstance(Type serviceType, string key); IEnumerable